Internal Combustion Engines The sensing element in the control system of nuclear reactors measures the _________ of the neutron flux in the reactor. Temperature Volume None of these Density Temperature Volume None of these Density ANSWER DOWNLOAD EXAMIANS APP
Internal Combustion Engines The voltage required to produce a spark across the gap, between the sparking points is 4000 to 6000 volts 6000 to 10,000 volts 10,000 to 12,000 volts 2000 to 4000 volts 4000 to 6000 volts 6000 to 10,000 volts 10,000 to 12,000 volts 2000 to 4000 volts ANSWER DOWNLOAD EXAMIANS APP
Internal Combustion Engines Fuel oil consumption guarantees for I .C. engine are usually based on High heat value of oil Calorific value of fuel Net calorific value of oil Low heat value of oil High heat value of oil Calorific value of fuel Net calorific value of oil Low heat value of oil ANSWER DOWNLOAD EXAMIANS APP
Internal Combustion Engines The reason for supercharging in any engine is to Effect fuel economy Reduce weight and bulk for a given output Increase efficiency Increase power Effect fuel economy Reduce weight and bulk for a given output Increase efficiency Increase power ANSWER DOWNLOAD EXAMIANS APP
Internal Combustion Engines In a four stroke cycle petrol engine, the compression Starts at 40° after bottom dead centre and ends at 30° before top dead centre May start and end anywhere Starts at bottom dead centre and ends at top dead centre Starts at 40° before bottom dead centre and ends at 30° after bottom dead centre Starts at 40° after bottom dead centre and ends at 30° before top dead centre May start and end anywhere Starts at bottom dead centre and ends at top dead centre Starts at 40° before bottom dead centre and ends at 30° after bottom dead centre ANSWER DOWNLOAD EXAMIANS APP
Internal Combustion Engines If the temperature of intake air in internal combustion engine increases, then its efficiency will Decrease None of the listed here Remain same Increase Decrease None of the listed here Remain same Increase ANSWER DOWNLOAD EXAMIANS APP