Theory of Machine The frictional torque transmitted in a flat pivot bearing with assumption of uniform pressure is _________ as compared to uniform wear. None of the listed here Same Less More None of the listed here Same Less More ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The velocity of a flat-faced follower when it has contact with the flank of a circular arc cam, is given by ωR cosθ ω(R - r₁) sinθ ωr₁ sinθ ω(R - r₁) cosθ ωR cosθ ω(R - r₁) sinθ ωr₁ sinθ ω(R - r₁) cosθ ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The minimum force required to slide a body of weight W on a rough horizontal plane is W sinθ W cosecθ W tanθ W cosθ W sinθ W cosecθ W tanθ W cosθ ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine When the crank is at the inner dead center, in a reciprocating steam engine, then the acceleration of the piston will be ω²r. (n + 1)/n ω²r. n/(n + 1) ω²r. (n - 1)/n ω²r. n/(n - 1) ω²r. (n + 1)/n ω²r. n/(n + 1) ω²r. (n - 1)/n ω²r. n/(n - 1) ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The velocity of any point in mechanism relative to any other point on the mechanism on velocity polygon is represented by the line Not possible to determine with these data Perpendicular to line as per (A) Joining the corresponding points At 45° to line as per (A) Not possible to determine with these data Perpendicular to line as per (A) Joining the corresponding points At 45° to line as per (A) ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine In a four-bar chain it is required to give an oscillatory motion to the follower for a continuous rotation of the crank. For the lengths of 50 mm of crank and 70 mm of the follower, determine theoretical maximum length of coupler. The minimum length of the coupler will be 95 mm Slightly more than 45 mm 45 mm Slightly less than 45 mm 95 mm Slightly more than 45 mm 45 mm Slightly less than 45 mm ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS