Building Construction Sum of tread and rise must lie between 500 to 550 mm 300 to 350 mm 600 to 650 mm 400 to 450 mm 500 to 550 mm 300 to 350 mm 600 to 650 mm 400 to 450 mm ANSWER DOWNLOAD EXAMIANS APP
Building Construction The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as Ridge None of these Valley Hip Ridge None of these Valley Hip ANSWER DOWNLOAD EXAMIANS APP
Building Construction For heavy embankments and dams, of height h, the depth of exploration of soil should not be less than h 2 h h/4 1/2h h 2 h h/4 1/2h ANSWER DOWNLOAD EXAMIANS APP
Building Construction Pick up the correct statements from the following: All listed here Excessive thermal variations in the backing or plaster causes the plaster to fall In brick work, the efflorescence is removed by applying a solution of zinc sulphate and water Cracks appear on the plastered surface in the form of hair cracks All listed here Excessive thermal variations in the backing or plaster causes the plaster to fall In brick work, the efflorescence is removed by applying a solution of zinc sulphate and water Cracks appear on the plastered surface in the form of hair cracks ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: All listed here Distance of G. of the loads from the smaller column = 3.00 m Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m All listed here Distance of G. of the loads from the smaller column = 3.00 m Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction The range of spread from the wall base to outer edge of a brick work foundation does not exceed 1 horizontal to 1 vertical 2 horizontals to 1 vertical 2/3 horizontal to 1 vertical 1/2 horizontal to 1 vertical 1 horizontal to 1 vertical 2 horizontals to 1 vertical 2/3 horizontal to 1 vertical 1/2 horizontal to 1 vertical ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS