Power Systems In load flow studies PV bus is treated as PQ bus when voltage at the bus become high phase angle become high reactive power goes beyond limit any of the above voltage at the bus become high phase angle become high reactive power goes beyond limit any of the above ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following will take least time in starting from cold condition to full load operation Gas turbine plant. Thermal power plant. Nuclear power plant. Hydro electric power plant. Gas turbine plant. Thermal power plant. Nuclear power plant. Hydro electric power plant. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A diesel power station has fuel consumption of 0.28 Kg per kWh. The calorific value of fuel is being 10000 KCal / kg. Determine the overall efficiency 30.26 %. 40.85 %. 30.7 %. 40 %. 30.26 %. 40.85 %. 30.7 %. 40 %. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of following statement are false A thermal reactor needs a moderator material. In a nuclear reactor, multiplication factor is kept almost equal to one. In nuclear power plants, chain reaction is controlled by cadmium rods. Nuclear power plants are used as peak load plants only. A thermal reactor needs a moderator material. In a nuclear reactor, multiplication factor is kept almost equal to one. In nuclear power plants, chain reaction is controlled by cadmium rods. Nuclear power plants are used as peak load plants only. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Objectives of power system is/are Rated voltage and frequency has to be supplied to the consumers Cost of electrical energy per KWh is to be minimum nether 1 nor 2 both 1 and 2 Rated voltage and frequency has to be supplied to the consumers Cost of electrical energy per KWh is to be minimum nether 1 nor 2 both 1 and 2 ANSWER DOWNLOAD EXAMIANS APP
Power Systems If L and C are 4 mH and 0.0001 μF respectively a current chop of magnitude 50 Amp would induced a voltage 50 kV. 100 kV. 400 kV. 200 kV. 50 kV. 100 kV. 400 kV. 200 kV. ANSWER DOWNLOAD EXAMIANS APP