Airport Engineering As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are 1.0, 1.5 and 1.5 2.0, 2.0 and 2.0 1.0, 1.5 and 2.0 1.5, 1.5 and 2.0 1.0, 1.5 and 1.5 2.0, 2.0 and 2.0 1.0, 1.5 and 2.0 1.5, 1.5 and 2.0 ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering Which of the following factors are taken into account for estimating the runway length required for aircraft landing?1. Normal maximum temperature2. Airport elevation3. Maximum landing weight4. Effective runway gradientSelect the correct answer using the codes given below Codes: 1,3, and 4 1,2 and 4 1,2,3 and 4 2 and 3 1,3, and 4 1,2 and 4 1,2,3 and 4 2 and 3 ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering For determining the basic runway length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is 0.5 0.4 0.75 0.6 0.5 0.4 0.75 0.6 ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering According to ICAO, all markings on the runways are Red White Black Yellow Red White Black Yellow ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are 4.2 m and 50 m 4.2 m and 30 m 3 m and 45 m 3 m and 30 m 4.2 m and 50 m 4.2 m and 30 m 3 m and 45 m 3 m and 30 m ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is 75 knots 850 knots 775 knots 675 knots 75 knots 850 knots 775 knots 675 knots ANSWER DOWNLOAD EXAMIANS APP