Windows 2000 Server
You are the administrator of a Windows 2000 Server computer. The server has a single hard disk with a single NTFS partition. You use a third-party tool to add a new partition to the disk. When you restart the server, you received the following error message: "Windows 2000 could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe. Please re-install a copy of the above file." What should you do to resolve the problem?

Start the computer in safe mode with command prompt. Modify the Partition parameter in the operating system path in C:boot.ini
Start the computer by using the Recovery Console. Modify the Partition parameter in the operating system path in C:Boot.ini
None of above
Start the emergency repair process. Choose the option to repair system files
Start the computer by using the Recovery Console. Run System File Checker

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are the administrator of a Windows 2000 Server computer that has FIVE hard disks. Four 100 GB hard disks on the server are configured as a single stripe volume. You want to reconfigure the fourth disk so that the volume is fault tolerant and has as much space possible available for storing data. You want to use only existing hardware. What should you do?

None of above
Backup the data on the stripe volume and delete the stripe
Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume
Convert the disk to dynamic disk shut doWn and restart the server
Backup the data on the stripe volume and delete the stripe volume. Create a mirror volume, shut down and restart the server. Restore the data to new mirror volumes

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized HAL to use with the computer. The HAL is on the floppy disk. You want to install the customized HAL design for the computer. What should you do?

After the text mode portion your windows 2000 setup is complete use the emergency repair process to replace the existing HAL with the customized HAL and then continue the windows 2000 setup
After text mode portion of Windows 2000 setup is complete use the recovery console to copy the customized HAL to the system32 folder on the boot partition
None of above
After the Windows 2000 setup is complete use the device manager to scan for Hardware changes when prompted install the customized HAL
During the text mode portion of the Windows 2000 setup install the customized HAL

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You install the Routing and Remote Access service on a Windows 2000 Server computer in your network. Your network is not directly connected to the Internet and uses the private IP address range 192.168.0.0. When you use Routing and Remote Access to dial in to the server, your computer connects successfully, but you are unable to access any resources. When you try to piiig servers by using their IP addresses, you receive the following message: "Request timed out." When you run the ipconfig command, it shows that your dial-up connection has been given the IP address 169.254.75.182. What should you do to resolve the problem?

Configure the remote access server to act as a DHCP Relay Agent
Authorize the remote access server to receive multiple addresses from a DHCP server
None of above
Configure the remote access server with the address of a DHCP server
Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are the administrator of Windows 2000 domain and TWO Windows NT domains. The Windows 2000 domains trust each of the Windows NT domains. Each of Windows NT domains trust the Windows 2000 domain. A Windows 2000 domain controller named DC1 is configured to use a highly secure domain controller template. Users in the Windows NT domain report that they cannot access DC1. You need to allow the users of computers in the Windows NT domain to access resources on DC1. What should you do?

Ensure the Windows 2000 domain is configured to run in the native mode
Apply a less restrictive custom security template to DC1
Apply a less restrictive custom policy to Windows NT domain controller
Ensure the Windows 2000 domain is configured in the mixed mode
None of above

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows 2000 Server