Windows 2000 Server
You are the administrator of a Windows 2000 Server computer named Intra. Intra is a member of an Active Directory domain and hosts an Intranet Web-Ske for your company. Company policy requires that only authenticated users have access to the intranet site. All company users have a user account in the Active Directory domain. You configure directory security for the Web Site to use integrated security. However, you discover that users can access the Web Site without authentication. You need to ensure that only authenticated users can access the web site. What should you do?

Clear the Allow Anonymous Connection check box
Install Active Directory on the server
Clear the Allow IIS to Control Password check box
Select Basic Authentication check box
Disable the IUSE_inta user account on Intra

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You install the Routing and Remote Access service on a Windows 2000 Server computer in your network. Your network is not directly connected to the Internet and uses the private IP address range 192.168.0.0. When you use Routing and Remote Access to dial in to the server, your computer connects successfully, but you are unable to access any resources. When you try to piiig servers by using their IP addresses, you receive the following message: "Request timed out." When you run the ipconfig command, it shows that your dial-up connection has been given the IP address 169.254.75.182. What should you do to resolve the problem?

Configure the remote access server to act as a DHCP Relay Agent
Authorize the remote access server to receive multiple addresses from a DHCP server
Configure the remote access server with the address of a DHCP server
None of above
Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
Your network is configured as shown in the exhibit. "Engineering! and Salesl have DHCP installed up them." All the servers are Windows 2000 Server computers that use TCP/IP as the only network protocol. The sales department uses one subnet and has servers named Salesl and Sales2. The engineering department uses another subnet and has servers named Engineeringl and Engineering2. Salesl and Engineeringl are configured to act as DHCP servers. The router that joins the two subnets is not RFC 1542 compliant and does not support DHCP/BOOTP relay. You want to allow Salesl and Engineeringl to support client computers on each other's subnets. What should you do?

On Engineering2 and Sales2, install and configure the DHCP Relay Agent service
Set the router option in the DHCP Scopes to 192.168.2.1 for Engineeringl and 192.168.1.1 for Salesl
Configure Engineering2 and Sales2 as DHCP servers without any scopes
On Engineering2 and Sales2, install Routing and Remote Access, and configure RIP as a routing protocol
None of above

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You have just configured two Windows NT Servers, Monitor 1 and Monitor 2 with no other software installed. You have an application server that needs to be monitored for performance to figure out what it's problem is, or to get some kind of baseline. You install Network Monitor on Monitor 2. What would you do to monitor Application server?

Configure the network monitor EDP port something for UDP
Install Network Monitor on Application Server
Install Network Monitor on Monitor 1
Configure Monitor 2 and Application server as monitoring partners (or something) to monitor the performance
Configure the network monitor ECP port something for TCP

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
Your network consists of Windows 2000 file servers, Windows 2000 print servers, Windows 2000 professional computers, Windows 2000 file servers. You must prevent any unsigned drivers from being installed on any computer in your Windows 2000 network. What should you do?

Configure a Group policy for the Domain that blocks all unsigned drivers
Configure a Group policy for the Default Domain Controller to block all unsigned drivers
Do nothing, this is the default setting
None of above
Configure the Windows 2000 file servers, Windows 2000 print servers, Windows 2000 professional computers and Windows 2000 file servers to block unsigned drivers

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You configure your Windows 2000 Server as a print server. You install a second PnP Network adapter to improve the performance. The first adapter uses IRQ11, and the second adapter uses IRQ5. The server is now unable to print to print devices connected to a non-PnP LPT2 port adapter. You want to continue to use the print devices connected to your print server. What should you do?

Edit the CMOS setting of the servers BIOS to reserve IRQ7 for non-PnP devices
Use device manager to change the IRQ for LPT2 to IRQ7
Edit the CMOS setting of the servers BIOS to reserve IRQ5 for non-PnP devices
Use device manager to change the IRQ for LPT1 to IRQ10
None of above

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows 2000 Server