Windows 2000 Server
Your network contains 10 domain controllers, 10 member servers, and approximately 1,000 client computers. All the servers run Windows 2000 Server, and all the client computers run Windows 2000 Professional. Two of the domain controllers act as DNS servers. Users of client computers use file sharing to grant access to files stored locally. The network has 10 subnets and uses TCP/IP as the only network protocol. You want to configure the network so that all computers can resolve the addresses of all other computers by using DNS. Client computers must be able to register and resolve addresses if a server fails. How should you configure the DNS servers?

Configure at least two servers with Active Directory integrated primary zones for the domain
Configure one server with a standard primary zone for the domain, and configure at least one server with standard secondary zone
Configure one server with an Active directory integrated primary zone for the domain, and configure at least one server with a standard secondary zone
Configure at least two servers with standard primary zones for the domain
Configure one server with a standard primary zone for the domain, and configure at least one server with an Active Directory integrated primary zone

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
Computer accounts and user accounts in your domain have been seperated into OUs for administrative purpose. You want to require strong passwords for the local user accounts only. What should you do?

Set a Group Policy on each local computer to enable the passwords must meet complexity requirements policy
Set a Group Policy on all OUs containing computer accounts to enable the passwords must meet complexity requirements policy
None of above
Set a Group Policy on the domain to enable the passwords must meet complexity requirements policy
Set a Group Policy on all OUs containing user accounts to enable the passwords must meet complexity requirements policy

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are the administrator of the Windows 2000 Server network shown in the exhibit. Users in the Research group and the Executive group have permission to access the Internet through a Windows 2000 Server computer running Microsoft Proxy Server. These users must enter their proxy server user names and passwords to connect to the proxy server, to the Internet, and to your local intranet server. The users who do not access the Internet do not have user accounts on the proxy server and, therefore, cannot connect to the intranet server. You want all users to be able to connect to the intranet server without entering a separate user name and password. What should you do?

Move the intranet server to the client segment of the network
Move the proxy server to the server segment of the network
Configure each client computer to bypass the proxy server for local addresses
None of above
Configure each client computer to use port 81 for the proxy server

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized HAL to use with the computer. The HAL is on the floppy disk. You want to install the customized HAL design for the computer. What should you do?

After the Windows 2000 setup is complete use the device manager to scan for Hardware changes when prompted install the customized HAL
During the text mode portion of the Windows 2000 setup install the customized HAL
After text mode portion of Windows 2000 setup is complete use the recovery console to copy the customized HAL to the system32 folder on the boot partition
None of above
After the text mode portion your windows 2000 setup is complete use the emergency repair process to replace the existing HAL with the customized HAL and then continue the windows 2000 setup

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You are the administrator of a Windows 2000 Server computer that has FIVE hard disks. Four 100 GB hard disks on the server are configured as a single stripe volume. You want to reconfigure the fourth disk so that the volume is fault tolerant and has as much space possible available for storing data. You want to use only existing hardware. What should you do?

Backup the data on the stripe volume and delete the stripe
Backup the data on the stripe volume and delete the stripe volume. Create a raidS volume on the four disks, restore the data to the new raid5 volume
None of above
Convert the disk to dynamic disk shut doWn and restart the server
Backup the data on the stripe volume and delete the stripe volume. Create a mirror volume, shut down and restart the server. Restore the data to new mirror volumes

ANSWER DOWNLOAD EXAMIANS APP

Windows 2000 Server
You install the Routing and Remote Access service on a Windows 2000 Server computer in your network. Your network is not directly connected to the Internet and uses the private IP address range 192.168.0.0. When you use Routing and Remote Access to dial in to the server, your computer connects successfully, but you are unable to access any resources. When you try to piiig servers by using their IP addresses, you receive the following message: "Request timed out." When you run the ipconfig command, it shows that your dial-up connection has been given the IP address 169.254.75.182. What should you do to resolve the problem?

None of above
Authorize the remote access server to receive multiple addresses from a DHCP server
Ensure that the remote access server is able to connect to a DHCP server that has a scope for its subnet
Configure the remote access server to act as a DHCP Relay Agent
Configure the remote access server with the address of a DHCP server

ANSWER DOWNLOAD EXAMIANS APP
MORE MCQ ON Windows 2000 Server