Power Systems Which of the following power stations is mainly used to cover peak load on the system? pumped storage hydro power plant coal based thermal power plant gas based thermal power plant nuclear plant pumped storage hydro power plant coal based thermal power plant gas based thermal power plant nuclear plant ANSWER DOWNLOAD EXAMIANS APP
Power Systems An ACSR conductor has a diameter of 2 cm has internal inductance of 0.05 mH/Km. If this ACSR is replaced with another having a diameter of 4 cm then its internal inductance is 0.05 mH/Km 0 mH/Km 0.1 mH/Km 0.025 mH/Km 0.05 mH/Km 0 mH/Km 0.1 mH/Km 0.025 mH/Km ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power station supplies the peak load of 50 MW, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55 the maximum demand on the station and average load respectively will be 53 MW. 51.61 MW. 57.5 MW. 52 MW. 53 MW. 51.61 MW. 57.5 MW. 52 MW. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Advantage/s of per unit system as compare to absolute system? calculation time is less All of these only one equation is required memory required is less calculation time is less All of these only one equation is required memory required is less ANSWER DOWNLOAD EXAMIANS APP
Power Systems A penstock is used as a condition between none of above. the heat ex-changer and the turbine in nuclear power plant. the dam and the turbine in a hydro station. the turbine and discharge drain. none of above. the heat ex-changer and the turbine in nuclear power plant. the dam and the turbine in a hydro station. the turbine and discharge drain. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A cable has the following characteristics, L = 0.201 µH/m and C = 196.2 pF/m. The velocity of wave propagation through cable is 159.24 m/s 159.24 m/µs 32 m/s 0.0312 m/s 159.24 m/s 159.24 m/µs 32 m/s 0.0312 m/s ANSWER DOWNLOAD EXAMIANS APP