Power Systems If the time of operation of a relay for unity TMS is 10 sec. the time of operation of 0.5 TMS will be _______________ secs. 3. 7. 20. 5. 3. 7. 20. 5. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The main advantage of the Decoupled Load Flow (DLF) as compared to the NR method is number of iterations are less accuracy is more All of these reduced memory requirements in storing the Jacobian elements number of iterations are less accuracy is more All of these reduced memory requirements in storing the Jacobian elements ANSWER DOWNLOAD EXAMIANS APP
Power Systems What are the methods of laying underground cables? None of these. Draw - in - system / duct - pipe laying. Both A and B. Direct laying. None of these. Draw - in - system / duct - pipe laying. Both A and B. Direct laying. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 1-phase transmission line has an impedance (3+4j) Ω . Find the power factor of the load for achieving maximum and zero voltage regulation? 0.6 lag and 0.6 lead 0.8 lag and 0.8 lead 0.8 lag and 0.6 lead 0.6 lag and 0.8 lead 0.6 lag and 0.6 lead 0.8 lag and 0.8 lead 0.8 lag and 0.6 lead 0.6 lag and 0.8 lead ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 250 MW and PG2 = 0 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 0 MW and PG2 = 250 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a pressurized water reactor heavy water is used as both coolant and moderator. the coolant water boils in the reactor core. both B and C. water is used at high pressure so that it is available is liquid from at about 280° C. heavy water is used as both coolant and moderator. the coolant water boils in the reactor core. both B and C. water is used at high pressure so that it is available is liquid from at about 280° C. ANSWER DOWNLOAD EXAMIANS APP