Power Systems Which of following statement are false Nuclear power plants are used as peak load plants only. A thermal reactor needs a moderator material. In a nuclear reactor, multiplication factor is kept almost equal to one. In nuclear power plants, chain reaction is controlled by cadmium rods. Nuclear power plants are used as peak load plants only. A thermal reactor needs a moderator material. In a nuclear reactor, multiplication factor is kept almost equal to one. In nuclear power plants, chain reaction is controlled by cadmium rods. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3-phase, 110 kV coaxial XLPE insulated power cable delivering power at 50 Hz, has a capacitance of 125 nF/km. If the dielectric loss tangent of XLPE is 2*10^-4, then dielcetric power loss in this cable in W/km/phase is 38.6 31.7 35.45 23.9 38.6 31.7 35.45 23.9 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Most commonly used material for insulator is glass mica All of these porcelain glass mica All of these porcelain ANSWER DOWNLOAD EXAMIANS APP
Power Systems Earth fault relay uses the which of the following sequence currents? negative sequence positive sequence zero sequence any of the above negative sequence positive sequence zero sequence any of the above ANSWER DOWNLOAD EXAMIANS APP
Power Systems Percentage of carbon is highest in coal gas. bituminous coal. anthracite coal. lignite coal. coal gas. bituminous coal. anthracite coal. lignite coal. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If transmission line parameters A and B are 0.9∠0° and 200∠90° respectively. Find the shunt reactor required to compensate the ferranti effect? 1500 Ω 750 Ω 2000 Ω 3000 Ω 1500 Ω 750 Ω 2000 Ω 3000 Ω ANSWER DOWNLOAD EXAMIANS APP