Power Systems Gas coolled reactor use coolant at pressure of 14-28 Kg/cm2 and at temperature of 700°-800° c. use CO2. or helium as coolant and graphite the moderator. both B and C. use heavy water as coolant as well as moderator. use coolant at pressure of 14-28 Kg/cm2 and at temperature of 700°-800° c. use CO2. or helium as coolant and graphite the moderator. both B and C. use heavy water as coolant as well as moderator. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If a 500 MVA, 11 kV 3-phase generator at 50 Hz feeds through a transfer impedance of (0+j0.605) Ω/phase, an infinite voltage also at 11 kV, then the maximum steady state power transfer on the base of 500 MVA and 11 kV is 0.4 pu 1 pu 0.8 pu 0.5 pu 0.4 pu 1 pu 0.8 pu 0.5 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems Advantages of gauss siedel method is/are All of these applicable for large power system network calculation time for each iteration is less number of iterations are less All of these applicable for large power system network calculation time for each iteration is less number of iterations are less ANSWER DOWNLOAD EXAMIANS APP
Power Systems What is the total installed power capacity (MW) in West Bengal as published by ministry of power in 2011? 10000.32. 15515.22. 6114.05. 8113.27. 10000.32. 15515.22. 6114.05. 8113.27. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A load centre is at an equidistant from the two thermal generating stations G1 and G2. The fuel cost characteristics of the generating stations are given by F1 = a + bP1 + cP²1 F2 = a + b P2 + 2cP²2 Where P1 and P2 are the generation in MW of G1 and G2, respectively. For most economic generation to meet 300 MW of load, P1 and P2 respectively, are 200, 100 175, 125 100, 200 150, 150 200, 100 175, 125 100, 200 150, 150 ANSWER DOWNLOAD EXAMIANS APP
Power Systems If a generator of 250 MVA rating has an inertia constant of 6 MJ/MVA, its inertia constant on 100 MVA base is 6 MJ/MVA 2.5 MJ/MVA 10.5 MJ/MVA 15 MJ/MVA 6 MJ/MVA 2.5 MJ/MVA 10.5 MJ/MVA 15 MJ/MVA ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS