Power Systems Find the characteristic impedance of a transmission line, if impedance is 16 Ω and admittance is 0.1 m℧? 320 Ω 200 Ω 160 Ω 400 Ω 320 Ω 200 Ω 160 Ω 400 Ω ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power station supplies the peak load of 50 MW, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55 the maximum demand on the station and average load respectively will be 57.5 MW. 52 MW. 53 MW. 51.61 MW. 57.5 MW. 52 MW. 53 MW. 51.61 MW. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following plants is/are base load plants pump storage both 1 and 2 run off river nuclear pump storage both 1 and 2 run off river nuclear ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following insulator is practically used for railway crossings? pin insulator string insulator strain insulator All of these pin insulator string insulator strain insulator All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems Maximum power capacity of a transmission line can be increased by nether 1 nor 2 either 1 or 2 increasing voltage level decreasing reactance value nether 1 nor 2 either 1 or 2 increasing voltage level decreasing reactance value ANSWER DOWNLOAD EXAMIANS APP
Power Systems If a 500 MVA, 11 kV 3-phase generator at 50 Hz feeds through a transfer impedance of (0+j0.605) Ω/phase, an infinite voltage also at 11 kV, then the maximum steady state power transfer on the base of 500 MVA and 11 kV is 0.5 pu 0.4 pu 0.8 pu 1 pu 0.5 pu 0.4 pu 0.8 pu 1 pu ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS