Power Systems When series reactor is used in generating stations, the fault current magnitude is reduced any of the above remains unaffected increased reduced any of the above remains unaffected increased ANSWER DOWNLOAD EXAMIANS APP
Power Systems Advantages of higher transmission voltage is/are Power transfer capability of the transmission line is increased Area of cross section and volume of the conductor is reduced Transmission line losses are reduced All of these Power transfer capability of the transmission line is increased Area of cross section and volume of the conductor is reduced Transmission line losses are reduced All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems Advantages of per unit system is/are It has units for all quantities Need of transformation ratio No units for any quantity All of these It has units for all quantities Need of transformation ratio No units for any quantity All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems Transmission line parameters of the short transmission line are Z,0,Y,1 1,Z,Y,1 1,Z,0,1 1,0,Y,1 Z,0,Y,1 1,Z,Y,1 1,Z,0,1 1,0,Y,1 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Specified quantities of load bus are P and Q V and δ Q and V P and δ P and Q V and δ Q and V P and δ ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW ANSWER DOWNLOAD EXAMIANS APP