Machine Design The resultant axial load on a bolt depends upon All of these External load applied Initial tension due to tightening of the bolt Relative elastic yielding of the bolt and the connected members All of these External load applied Initial tension due to tightening of the bolt Relative elastic yielding of the bolt and the connected members ANSWER DOWNLOAD EXAMIANS APP
Machine Design A hollow saddle key is Provided in pairs at right angles and each key is to withstand torsion in one direction only A taper key which fits in a key way of the hub and is flat on the shaft A taper key which fits half in the key way of hub and half in the key way of shaft A taper key which fits in a key way of the hub and the bottom of the key is shaped to fit the curved surface of the shaft Provided in pairs at right angles and each key is to withstand torsion in one direction only A taper key which fits in a key way of the hub and is flat on the shaft A taper key which fits half in the key way of hub and half in the key way of shaft A taper key which fits in a key way of the hub and the bottom of the key is shaped to fit the curved surface of the shaft ANSWER DOWNLOAD EXAMIANS APP
Machine Design A pressure vessel is said to be a thick shell, if the ratio of wall thickness to its diameter is Less than 1/10 Greater than 1/10 None of these Equal to 1/10 Less than 1/10 Greater than 1/10 None of these Equal to 1/10 ANSWER DOWNLOAD EXAMIANS APP
Machine Design For steel, the ultimate strength in shear as compared to ultimate strength in tension is 43834 43864 43832 43833 43834 43864 43832 43833 ANSWER DOWNLOAD EXAMIANS APP
Machine Design In a turnbuckle, if one of the rods has left hand threads, then the other rod will have Left hand threads Multiple threads Right hand threads Pointed threads Left hand threads Multiple threads Right hand threads Pointed threads ANSWER DOWNLOAD EXAMIANS APP
Machine Design When the belt is transmitting maximum power, the belt speed should be (Where, m = mass of belt per meter (kg/m) and Pmax = maximum permissible tension in belt (N)) √(3m /Pmax) √(Pmax / 2m) √(Pmax / 3m) √(Pmax / m) √(3m /Pmax) √(Pmax / 2m) √(Pmax / 3m) √(Pmax / m) ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS