Railway Engineering The height of the rail for 52 kg rail section is 162 mm 156 mm 187 mm 189 mm 162 mm 156 mm 187 mm 189 mm ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Two important constituents in the composition of steel used for rail are Carbon and silicon Manganese and phosphorous Carbon and sulphur Carbon and manganese Carbon and silicon Manganese and phosphorous Carbon and sulphur Carbon and manganese ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Flat mild steel bearing plates are used On all the above With wooden sleepers at locations where creep is likely to be developed On all joints and curves For points and crossings in the lead portion On all the above With wooden sleepers at locations where creep is likely to be developed On all joints and curves For points and crossings in the lead portion ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Switch angle is the angle between the outer face of the stock rail and the gauge face of the tongue rail the gauge face of the stock rail and tongue rail the gauge face of the stock rail and outer face of the tongue rail the outer face of the stock rail and tongue rail the outer face of the stock rail and the gauge face of the tongue rail the gauge face of the stock rail and tongue rail the gauge face of the stock rail and outer face of the tongue rail the outer face of the stock rail and tongue rail ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering 52 kg rails are mostly used in Broad Gauge Narrow Gauge both (a) and (b) Meter Gauge Broad Gauge Narrow Gauge both (a) and (b) Meter Gauge ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Tensile strength of steel used in rails should not be less than 450 MPa 500 MPa 700 MPa 850 MPa 450 MPa 500 MPa 700 MPa 850 MPa ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS