Railway Engineering The load on each axle of a locomotive is 22 tonnes. If the coefficient of friction is 0.2, then the hauling capacity due to 3 pairs of driving wheels will be 26.41 19.81 13.21 6.61 26.41 19.81 13.21 6.61 ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called Roaring rails Corrugated rails Hogged rails Buckled rails Roaring rails Corrugated rails Hogged rails Buckled rails ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering To ensure exact gauge, the gauge tie plates are provided at None of these nose of crossing both (A) and (B) toe of the switch None of these nose of crossing both (A) and (B) toe of the switch ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering The type of bearing plate used in all joints and on curves to give better bearing area to the rails is flat mild steel bearing plate mild steel canted bearing plate None of these cast iron anti creep bearing plate flat mild steel bearing plate mild steel canted bearing plate None of these cast iron anti creep bearing plate ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Head width of 52 kg rail section is 72.33 mm 67 mm 61.9 mm 66.7 mm 72.33 mm 67 mm 61.9 mm 66.7 mm ANSWER DOWNLOAD EXAMIANS APP
Railway Engineering Anti creep bearing plates are provided on both (A) and (B) None of these bridges and approaches joints both (A) and (B) None of these bridges and approaches joints ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS