Building Construction The brick laid with its breadth parallel to the face of a wall, is known as Stretcher Header None of these Closer Stretcher Header None of these Closer ANSWER DOWNLOAD EXAMIANS APP
Building Construction The window which is provided on a sloping roof of a building, is called Louvered window Rash window Lantern window Dormer window Louvered window Rash window Lantern window Dormer window ANSWER DOWNLOAD EXAMIANS APP
Building Construction The disease of dry rot in timber is caused by Complete submergence in water Alternate wet and dry conditions Lack of ventilation None of these Complete submergence in water Alternate wet and dry conditions Lack of ventilation None of these ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: All listed here Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m Distance of C.G. of the loads from the smaller column = 3.00 m All listed here Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m Distance of C.G. of the loads from the smaller column = 3.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction In grillage foundations, distance between flanges of grillage beams, is kept 40 cm Maximum of (A), (B) and (C) Equal to flange width Twice the flange width 40 cm Maximum of (A), (B) and (C) Equal to flange width Twice the flange width ANSWER DOWNLOAD EXAMIANS APP
Building Construction Grillage foundation All listed here Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth Is light and economical Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity All listed here Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth Is light and economical Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS