Process Equipment and Plant Design Normally, the length to diameter ratio of rotary dryers varies form 4 to 10 and for its economic operation, the number of transfer units (NTU) for such dryers varies from 44119 3.5-5.5 7.5-10.0 1.5-2.5 44119 3.5-5.5 7.5-10.0 1.5-2.5 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Factor of safety (i.e., overdesign factor) in heat transfer equipments is about __________ percent more than the actual/theoretical design factor. 15-20 43961 35-40 30-35 15-20 43961 35-40 30-35 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Minimum baffle spacing recommended in a shell and tube heat exchanger is equal to 25 cms 40% of the I.D. of the shell I.D. of the shell 5 cms 25 cms 40% of the I.D. of the shell I.D. of the shell 5 cms ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The ratio of tube length to shell diameter in case of liquid shell and tube heat exchanger ranges from 3 to 5 2 to 3 6 to 12 4 to 8 3 to 5 2 to 3 6 to 12 4 to 8 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Tubes are fixed to the tube sheet (a thick circular metallic plate) by the method of tube rolling and brazing (non-removable) or ferrule connection (removable). Thickness of the tube, sheet is normally __________ the outside diameter of the tube but in no case it should be less than 22 mm (7/8"). Three fourth Half 1.5 times Equal to Three fourth Half 1.5 times Equal to ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS