Building Construction In any good staircase, the maximum and minimum pitch respectively should be 90° and 0° 60° and 10° 75° and 30° 40° and 25° 90° and 0° 60° and 10° 75° and 30° 40° and 25° ANSWER DOWNLOAD EXAMIANS APP
Building Construction For brick construction, the lime-sand mortar, is 1 : 1 1 : 4 1 : 2 1 : 3 1 : 1 1 : 4 1 : 2 1 : 3 ANSWER DOWNLOAD EXAMIANS APP
Building Construction The projections of head or sill of a door or window frame are Stops Transoms Chocks Horns Stops Transoms Chocks Horns ANSWER DOWNLOAD EXAMIANS APP
Building Construction Depth or height of the arch is the Perpendicular distance between springing line and extrados Perpendicular distance between intrados and extrados None of these Vertical distance between springing line and intrados Perpendicular distance between springing line and extrados Perpendicular distance between intrados and extrados None of these Vertical distance between springing line and intrados ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: Area of footing slab = 11.00 m2 All listed here Distance of C.G. of the loads from the smaller column = 3.00 m The length of the foundation slab = 7.00 m Area of footing slab = 11.00 m2 All listed here Distance of C.G. of the loads from the smaller column = 3.00 m The length of the foundation slab = 7.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is Mitred joint Oblique mortise and tenon joint Butt joint Mortise and tenon joint Mitred joint Oblique mortise and tenon joint Butt joint Mortise and tenon joint ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS