Power Systems For flat voltage profile system, voltage regulation is 50% any of the above 0% 100% 50% any of the above 0% 100% ANSWER DOWNLOAD EXAMIANS APP
Power Systems The incremental fuel costs for two generating units G1 and G2 are given by Ic1 = 25 + 0.2 PG1 and Ic2 = 32 + 0.2 PG2, where PG1 and PG2 are real powers generated by the units. The economic allocation for a total load of 250 MW, neglecting transmission loss, is given by PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 100 MW and PG2 = 150 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems An impulse turbine is most suited for low head and high discharge power plants. makes use of a draft tube. operates by initial complete conversion to kinetic energy. always operates submerged. is most suited for low head and high discharge power plants. makes use of a draft tube. operates by initial complete conversion to kinetic energy. always operates submerged. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Recovery voltage in CB is equal to transient voltage. none of these. normal frequency 50 Hz rms voltage. arcing period voltage. transient voltage. none of these. normal frequency 50 Hz rms voltage. arcing period voltage. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The sequence components of the fault current are as follows: IR1 = j1.5 pu, IR2 = -j0.5 pu, IR0 = -j1. The type of fault is LL LG LLG LLL LL LG LLG LLL ANSWER DOWNLOAD EXAMIANS APP
Power Systems The maximum efficiency of modern coal fired steam steam raising thermal power plants is restricted to about 0.35( a low value), mainly because of high energy loss in condenser low steam turbine mechanical efficiency high energy loss in boilers low alternator efficiency high energy loss in condenser low steam turbine mechanical efficiency high energy loss in boilers low alternator efficiency ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS