Power Systems Electrostatic precipitators in thermal power plants are used for control flow rate removal of ash from flue gas remove moisture from the cole All of these control flow rate removal of ash from flue gas remove moisture from the cole All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a nuclear reator thermal energy is obtained from all of above. burning of fuel rods in oxygen. fission of radioactive material. fusion of radioactive material. all of above. burning of fuel rods in oxygen. fission of radioactive material. fusion of radioactive material. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If a 500 MVA, 11 kV 3-phase generator at 50 Hz feeds through a transfer impedance of (0+j0.605) Ω/phase, an infinite voltage also at 11 kV, then the maximum steady state power transfer on the base of 500 MVA and 11 kV is 0.5 pu 1 pu 0.4 pu 0.8 pu 0.5 pu 1 pu 0.4 pu 0.8 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems The ratio of reset to pick up current for an induction cup relay is approximately 1.0. 0.75. 0.99. 1.35. 1.0. 0.75. 0.99. 1.35. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power generating station has a plant capacity of 200 MW and maximum power demand is 150 MW. If average power generation is 110 MW, then find the load factor and capacity factor respectively? 0.733 and 0.65 0.55 and 0.733 0.733 and 0.55 0.65 and 0.55 0.733 and 0.65 0.55 and 0.733 0.733 and 0.55 0.65 and 0.55 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The flow duration curve at a given head of a hydroelectric plant is used to determine diversity factor for the plant. total units of energy available. total power available at the site. load factory at the plant. diversity factor for the plant. total units of energy available. total power available at the site. load factory at the plant. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS