Measurement and Instrumentation An ammeter is ______ instrument. None of the listed here An indicating A recording An integrating None of the listed here An indicating A recording An integrating ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A CRO probe has an impedance of 500 kΩ in parallel with a capacitance of 10 pF. The probe is used to measure the voltage between P and Q as shown in figure. The measured voltage will be 5 V. 3.53 V. 4.38 V. 4.54 V. 5 V. 3.53 V. 4.38 V. 4.54 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A variable w is related to three other variables x, y and z as w = xy/z. The variables are measured with meters of accuracy ± 0.5% reading, ± 1% of full scale value and ± 1.5% reading. The actual readings of the three meters are 80, 20 and 50 with 100 being the full scale value for all three. The maximum uncertainty in the measurement of w will be ± 8% ± 5% ± 6% ± 7% ± 8% ± 5% ± 6% ± 7% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The effect of load resistance is important in measurement of resistance of shunt winding. resistance of shunt. both A and B. resistance of ammeter. resistance of shunt winding. resistance of shunt. both A and B. resistance of ammeter. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which of the following is a variable displacement transducer? synchros potentiometer tachometer None of these synchros potentiometer tachometer None of these ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An instrument to be used for measurement and control should preferably have A highly damped response Dead zone and dead time Linear output and fast response Non-linear output A highly damped response Dead zone and dead time Linear output and fast response Non-linear output ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS