Measurement and Instrumentation Standard resistor ia made from Nichrome Manganin Platinum Silver Nichrome Manganin Platinum Silver ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The internal resistance of a milli-ammeter must be very low for high accuracy. minimum effect on the current in the circuit. high precision. high sensitivity. high accuracy. minimum effect on the current in the circuit. high precision. high sensitivity. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Kelvin’s double bridge is used to measure low resistance because effect of contact and lead resistance is eliminated. resistance variation due to temperature. it has high sensitivity. there is no thermo electric emf. effect of contact and lead resistance is eliminated. resistance variation due to temperature. it has high sensitivity. there is no thermo electric emf. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A spring-controlled moving iron voltmeter draws a current of 1 mA for full scale value of 100V. If it draws a current of 0.5 mA, the meter reading is 100 V. 200 V. 50 V. 25 V. 100 V. 200 V. 50 V. 25 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 10 mA. 0.5 mA. 100 mA. 1mA. 10 mA. 0.5 mA. 100 mA. 1mA. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used? 1/49.99 ohms 49.99 Ohms 1 Ohm 2 Ohms 1/49.99 ohms 49.99 Ohms 1 Ohm 2 Ohms ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS