Measurement and Instrumentation The thermocouple instrument will measure Voltage Current None of these Flux Voltage Current None of these Flux ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The maximum percentage error in the sum of two voltage measurements when V1 = 100V ± 1% and V2 = 80V ± 5% is ± 6% ± 3% ± 4% ± 2.8% ± 6% ± 3% ± 4% ± 2.8% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In two wattmeter method of power measurement if the total power is measured by one wattmeter only then power factor of the system is 1. 0. 0.5. none of above. 1. 0. 0.5. none of above. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Two voltmeters have the same range 0-400V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600V be applied across them, the readings are 360V and 240V 300V each One of the meters out of the range and other 100V 400V and 200V 360V and 240V 300V each One of the meters out of the range and other 100V 400V and 200V ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measurement of high direct voltage, one would use _____ voltmeter. PMMC Hot wire Electrostatic Moving iron PMMC Hot wire Electrostatic Moving iron ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a wheatstone bridge, a change of 6 Ω in the unknown arm of bridge is required to produce a change in deflection of 2.4 mm of the galvanometer. The sensitivity is 5.0 mm/Ω 0.8 mm/Ω 2.5 mm/Ω 0.4 mm/Ω 5.0 mm/Ω 0.8 mm/Ω 2.5 mm/Ω 0.4 mm/Ω ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS