Measurement and Instrumentation In a moving coil instrument, the deflecting torque is proportional to Sine of the measurand Squareroot of the current Current Square of the current Sine of the measurand Squareroot of the current Current Square of the current ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The resistance of a circuit is found by measuring current flowing and the power fed into the circuit. If the limiting errors in the measurement of power and current are ± 1.5% and ± 1.0% respectively, the limiting error in the measurement of resistance ± 2.5% ± 3.5% ± 1.5% ± 1% ± 2.5% ± 3.5% ± 1.5% ± 1% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A bridge circuit is shown in the figure below. Which one of the sentence given below is most suitable for balancing the bridge? First adjust R4 and then adjust R1. First adjust R4 and then adjust R2. First adjust R2 and then adjust R3. First adjust R2 and then adjust R4. First adjust R4 and then adjust R1. First adjust R4 and then adjust R2. First adjust R2 and then adjust R3. First adjust R2 and then adjust R4. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measuring an AC voltage by an AC potentiometer it is desirable that the supply for the potentiometer is taken from A source other than the source of unknown voltage. Any of above. The same source as the unknown voltage. A battery. A source other than the source of unknown voltage. Any of above. The same source as the unknown voltage. A battery. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In the bridge given in the figure, the reading of the high impedance voltmeter is - 3.33 V. 6.66 V. Zero. 4.20 V. - 3.33 V. 6.66 V. Zero. 4.20 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Why is a MISC meter not recommended for DC measurement? The error is high due to hysteresis effect The meter is calibrated for AC and it’s error for DC would be high The meter does not respond to DC signals The error is high due to eddy current effect The error is high due to hysteresis effect The meter is calibrated for AC and it’s error for DC would be high The meter does not respond to DC signals The error is high due to eddy current effect ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS