Measurement and Instrumentation In a gravity controlled instrument, the deflection angle is proportional Square of the measurand Sine of the measurand Measurand Sine inverse of measurand Square of the measurand Sine of the measurand Measurand Sine inverse of measurand ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A 10MHz CRO has 10MHz supply frequency 10MHz horizontal oscillator 5MHz sweep 10MHz vertical oscillator 10MHz supply frequency 10MHz horizontal oscillator 5MHz sweep 10MHz vertical oscillator ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The errors introduced by an instrument fall in which category ? Gross errors Random errors Environmental errors Systematic errors Gross errors Random errors Environmental errors Systematic errors ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken From the same source as the unknown voltage From a source which is not the same as the unknown voltage From a battery Any of the above From the same source as the unknown voltage From a source which is not the same as the unknown voltage From a battery Any of the above ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which one of the following meters has maximum loading effect on the circuit under measurement ? 1000 Ω/volt 1 MΩ/volt 10 MΩ/volt 100 Ω/volt 1000 Ω/volt 1 MΩ/volt 10 MΩ/volt 100 Ω/volt ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A 50 Hz bar primary CT has a secondary with 500 turns. The secondary supplies 5 A current into a purely resistive burden of 1Ω. The magnetizing ampere-turn is 200. The phase angle between the primary and secondary current is 4.6o. 175.4o. 94.6o. 85.4o. 4.6o. 175.4o. 94.6o. 85.4o. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS