Measurement and Instrumentation To measure ac as well as dc power, we use Induction wattmeter Dynamometer wattmeter None of the listed here Sometimes induction and sometimes dynamometer wattmeter Induction wattmeter Dynamometer wattmeter None of the listed here Sometimes induction and sometimes dynamometer wattmeter ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation To measure 5 volts, if one selects a 0-100 volt range voltmeter which is accurate with in ± 1%, then the error in this measurement may be up to ± 20% ± 1.5% ± 7.5 % ± 2.5% ± 20% ± 1.5% ± 7.5 % ± 2.5% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A PMMC instrument can be used as flux meter By eliminating the control springs By using a high series resistance By making control springs of large moment of inertia By using a low resistance shunt By eliminating the control springs By using a high series resistance By making control springs of large moment of inertia By using a low resistance shunt ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measurement of mutual inductance we can use Maxwell's bridge Any of the listed here Anderson bridge Heavyside bridge Maxwell's bridge Any of the listed here Anderson bridge Heavyside bridge ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistance is measured by the voltmeter-ammeter method employing dc excitation and a voltmeter of very high resistance connected directly across the unknown resistance. If the voltmeter and ammeter reading are subject to maximum possible errors of ± 2.4 % and ± 1.0 % respectively, then the magnitude of the maximum possible percentage error in the value of resistance deduced from the measurement is nearly ± 2.4% ± 3.4% ± 1% ± 1.4% ± 2.4% ± 3.4% ± 1% ± 1.4% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Schering bridge is used to measure which of the following? Frequency. Inductance. Capacitance. Resistance. Frequency. Inductance. Capacitance. Resistance. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS