Measurement and Instrumentation Piezoelectric effect is carried out in m derived. constant k prototype. crystal filter. composite filter. m derived. constant k prototype. crystal filter. composite filter. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The coil of a moving iron instrument has a resistance of 500 ohm and inductance of 1 H. It reads 250 V when a 250 V DC is applied. It series resistance is 2000 ohms its reading when fed by 250 V, 50 Hz AC will be 260 V. 248 V. 250 V. 252 V. 260 V. 248 V. 250 V. 252 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Dynamic errors are caused by environmental error observational error instrument not responding fast human error environmental error observational error instrument not responding fast human error ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The difference between the indicated value and the true value of a quantity is Relative error Dynamic error Gross error Absolute error Relative error Dynamic error Gross error Absolute error ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The meter constant of a single phase 240 V induction watthour meter is 400 revolutions per KWh. The speed of the meter disc for a current of 10 Amperes of 0.8 p.f lagging will be 12.8 rpm. 21.1 rpm. 16.02 rpm. 18.2 rpm. 12.8 rpm. 21.1 rpm. 16.02 rpm. 18.2 rpm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The pressure coil of a wattmeter should be connected on the supply side of the current coil when Load impedance is high Load impedance is low Supply voltage is low None of these Load impedance is high Load impedance is low Supply voltage is low None of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS