Measurement and Instrumentation A voltmeter using thermocouple measures Average value. rms value. Peak to peak value. Peak value. Average value. rms value. Peak to peak value. Peak value. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation How many time-base circuits does a dual face CRO can have? 4. 3. 2. 1. 4. 3. 2. 1. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A null type instrument as compared to a deflected type instrument has All of these a higher accuracy. a faster response. a lower sensitivity. All of these a higher accuracy. a faster response. a lower sensitivity. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 15 V. 10.6 V. 12.6 V. 11.1 V. 15 V. 10.6 V. 12.6 V. 11.1 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The current ‘I’ through a resistance R is measures with the following uncertainties I = 4 A ± 0.5%, R = 100Ω±0.2%. If power is computed from these two measured quantities, the uncertainty in the power computed will be 1.2% 0.5% 1.5% 1% 1.2% 0.5% 1.5% 1% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving coil of a meter has 100 turns, and a length and depth of 10 mm and 20 mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carries a current of 50 mA. The torque on the coil is 200 µNm. 1 µNm. 2 µNm. 100 µNm. 200 µNm. 1 µNm. 2 µNm. 100 µNm. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS