Microwave Communication A traveling-wave tube (TWT) amplifies by virtue of The effect of an external magnetic field The energy liberated form the collector The energy contained the cavity resonators The absorption of energy by the signal from an electron stream The effect of an external magnetic field The energy liberated form the collector The energy contained the cavity resonators The absorption of energy by the signal from an electron stream ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication In a pulsed radar set, the STC circuit is used to Reduce interference from the effects of sea return Improve the target bearing resolution Increases receiver sensitivity for echoes from targets Vary the pulse frequency in order to control the maximum target Reduce interference from the effects of sea return Improve the target bearing resolution Increases receiver sensitivity for echoes from targets Vary the pulse frequency in order to control the maximum target ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication If k-factor is greater than 1, the array beam is bent Away from the earth Towards the ionosphere, Towards the outer space Towards the earth Away from the earth Towards the ionosphere, Towards the outer space Towards the earth ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication To achieve good bearing resolution when using a pulsed-radar set, an important requirement is A high duty cycle A narrow, antenna-beam width in the vertical plane A narrow, antenna-beam width in the horizontal plane A low repetition rate A high duty cycle A narrow, antenna-beam width in the vertical plane A narrow, antenna-beam width in the horizontal plane A low repetition rate ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication The antenna separations (in meters) required for optimum operation of a space diversity system can be calculated from:where R = effective earth radius (m) and L = path length (m) S = 2λR/L S = λR/RL S = 3λR/L S = λR/L S = 2λR/L S = λR/RL S = 3λR/L S = λR/L ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication A PPI cathode-ray tube as used on a radar set Indicates only the range of a target Is used for receiver alignment Is used to check the percentage of modulation Indicates both the range and azimuth of a target Indicates only the range of a target Is used for receiver alignment Is used to check the percentage of modulation Indicates both the range and azimuth of a target ANSWER DOWNLOAD EXAMIANS APP