Microwave Communication A PPI cathode-ray tube as used on a radar set Is used to check the percentage of modulation Indicates only the range of a target Is used for receiver alignment Indicates both the range and azimuth of a target Is used to check the percentage of modulation Indicates only the range of a target Is used for receiver alignment Indicates both the range and azimuth of a target ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication In a radar-set receiver, the usual mixer stage is A Rochelle salts crystal A silicon crystal A tunnel diode And FET A Rochelle salts crystal A silicon crystal A tunnel diode And FET ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication If the instantaneous RF potentials on the two sides of a magnetron cavity are of opposite polarity, the operation is in the π/4 mode π/2 mode π mode 2π mode π/4 mode π/2 mode π mode 2π mode ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication Coupling into and out of a traveling-wave tube can be accompanied by a Cavity match All of these Direct coax-helix match Waveguide match Cavity match All of these Direct coax-helix match Waveguide match ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication Which of the following operating frequencies is used for the modern loran navigational system? Loran A: 1950 kHz Loran C: 100 kHz Loran D: 10.2 kHz Loran B: 900 kHz Loran A: 1950 kHz Loran C: 100 kHz Loran D: 10.2 kHz Loran B: 900 kHz ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication The cavity resonator Is equivalent to an LC resonant circuit In a reflect klystron has its output taken from the reflector plate Has a low Q factor for narrow operation. Produces a frequency which is independent of the cavity size. Is equivalent to an LC resonant circuit In a reflect klystron has its output taken from the reflector plate Has a low Q factor for narrow operation. Produces a frequency which is independent of the cavity size. ANSWER DOWNLOAD EXAMIANS APP