Microwave Communication If k-factor is greater than 1, the array beam is bent Towards the outer space Towards the earth Away from the earth Towards the ionosphere, Towards the outer space Towards the earth Away from the earth Towards the ionosphere, ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication Oscillators of a klystron tube are maintained By feedback between the accelerating grid and the repeller By circulating bunches of electrons within the cavities. By bunches of electrons passing the cavity grids By plate-to-cathode feedback By feedback between the accelerating grid and the repeller By circulating bunches of electrons within the cavities. By bunches of electrons passing the cavity grids By plate-to-cathode feedback ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication The frequency of the oscillation generated by a magnetron, is mainly determined by The dimension of each cavity resonator The ratio of the dc cathode voltage to the magnetic flux density The number of the cavity resonators The flux density of the external magnet The dimension of each cavity resonator The ratio of the dc cathode voltage to the magnetic flux density The number of the cavity resonators The flux density of the external magnet ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication It is possible to increase the maximum range of a radar equipment by Narrowing the beam width and increasing the pulse duration Raising the peak power of the transmitter Lowering the pulse frequency All of these Narrowing the beam width and increasing the pulse duration Raising the peak power of the transmitter Lowering the pulse frequency All of these ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication What ferrite device can be used instead of duplexer of isolate microwave transmitter and receiver when both are connected to the same antenna? Simplex Magnetron Isolator Circulator Simplex Magnetron Isolator Circulator ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication The antenna separations (in meters) required for optimum operation of a space diversity system can be calculated from:where R = effective earth radius (m) and L = path length (m) S = λR/RL S = λR/L S = 3λR/L S = 2λR/L S = λR/RL S = λR/L S = 3λR/L S = 2λR/L ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS