Power Systems A transmission line has an impedance of (2+j6) Ω has voltage regulation of 10% at a load power factor of 0.8 lag. Find the voltage regulation for a load of 0.6 lead -10% 6.92% -6.92% 10% -10% 6.92% -6.92% 10% ANSWER DOWNLOAD EXAMIANS APP
Power Systems Stability of a transmission line can be increased by series capacitor both 1 and 2 shunt capacitor shunt reactor series capacitor both 1 and 2 shunt capacitor shunt reactor ANSWER DOWNLOAD EXAMIANS APP
Power Systems A pin type insulator has 100 kV puncture voltage. If 10 kV flash over voltage occurred in a transmission line, then find the safety factor of insulator? 0.1 0.001 1000 10 0.1 0.001 1000 10 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The positive (Z1), negative (Z2) and zero sequence (Z0) impedances of a transmission line follows the relation any of the above (Z1 = Z2) > Z0 Z1 = Z2 = Z0 (Z1 = Z2) < Z0 any of the above (Z1 = Z2) > Z0 Z1 = Z2 = Z0 (Z1 = Z2) < Z0 ANSWER DOWNLOAD EXAMIANS APP
Power Systems On a power system network the load is increasing represents the value of impedance decrease. none of above. increase. remains constant. decrease. none of above. increase. remains constant. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the diameter of the conductor is increased no change in inductance and resistance the inductance is decreased the inductance is increased the resistance is increased no change in inductance and resistance the inductance is decreased the inductance is increased the resistance is increased ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS