Power Systems Which of the following methods is/are used for reactive or voltage compensation generation excitation control All of these shunt capacitor series capacitor generation excitation control All of these shunt capacitor series capacitor ANSWER DOWNLOAD EXAMIANS APP
Power Systems The zero sequence current of a generator for line to ground fault is j3 pu. Then the current through the neutral during the fault is j1 pu j6 pu j9 pu j3 pu j1 pu j6 pu j9 pu j3 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a Gauss Seidel load flow method, the number of iterations may be reduced if the correction in voltage at each bus is multiplied by Lagrange multiplier Acceleration factor Gauss constant Blocking factor Lagrange multiplier Acceleration factor Gauss constant Blocking factor ANSWER DOWNLOAD EXAMIANS APP
Power Systems What will be the ratio of the C.T. on the H.V side of a 3 - φ star / delta 33 / 11 kV transformer if the protecting CT on the LV side has a ratio of 300 : 5 ? 150 : 4 / √3. 200 : 5 / √3. 100 : 5 / √3. 120 : 6 / √3. 150 : 4 / √3. 200 : 5 / √3. 100 : 5 / √3. 120 : 6 / √3. ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a 400 KV network, 360 KV is recorded at a 400 KV bus. The reactive power absorbed by shunt rated for 50 MVAr, 400 KV connected at the bus is 45 MVAr. 61.73 MVAr. 40.5 MVAr. 55.56 MVAr. 45 MVAr. 61.73 MVAr. 40.5 MVAr. 55.56 MVAr. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the rated receiving end voltage is 33 kV, then what are the limits for safe operation of equipments? 25 to 35 kV 33 to 50 kV 31.35 to 34.65 kV any voltage above 33 kV 25 to 35 kV 33 to 50 kV 31.35 to 34.65 kV any voltage above 33 kV ANSWER DOWNLOAD EXAMIANS APP