Power Systems For 132 kV system, the reactance and capacitance up to the location of the CB is 3 Ω and 0.015 μF respectively. The maximum value of RRRV is 9.01 kV / μs. 12.2 kV / μs. 10.01 kV / μs. 2.0 kV / μs. 9.01 kV / μs. 12.2 kV / μs. 10.01 kV / μs. 2.0 kV / μs. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The internal flux linkage due to internal flux of a conductor is I/6*10-7 wb-T/m I/2*10-7 wb-T/m All of these I/4*10-7 wb-T/m I/6*10-7 wb-T/m I/2*10-7 wb-T/m All of these I/4*10-7 wb-T/m ANSWER DOWNLOAD EXAMIANS APP
Power Systems The function of moderator in a nuclear reactor is All of these to slow down the neutrons. to increase the energy of the neutrons. to absorb the excess. All of these to slow down the neutrons. to increase the energy of the neutrons. to absorb the excess. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A cable has inductance of 0.22 mH per km and capacitance of 0.202 µF per km. The surge impedance of the cable is 33 Ω 28 Ω 52 Ω 40 Ω 33 Ω 28 Ω 52 Ω 40 Ω ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which device is used for protection of equipment from from damage caused by overload or short circuit? circuit breaker CVT lightning arrester current transformer circuit breaker CVT lightning arrester current transformer ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 150 MW and PG2 = 100 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS