Building Construction Vertical construction joints are provided where the shearing forces are minimum in the case of All of these Beams Slabs Girders All of these Beams Slabs Girders ANSWER DOWNLOAD EXAMIANS APP
Building Construction Bearing capacity of soils cannot be improved by Watering surface of soil Ramming crushed stone in soil Driving sand piles Draining sub-soil water Watering surface of soil Ramming crushed stone in soil Driving sand piles Draining sub-soil water ANSWER DOWNLOAD EXAMIANS APP
Building Construction In soft clay of low bearing capacity, the type of steel pile generally used, is Disc pile Screw pile Pipe pile H-pile Disc pile Screw pile Pipe pile H-pile ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: The length of the foundation slab = 7.00 m All listed here Area of footing slab = 11.00 m2 Distance of C.G. of the loads from the smaller column = 3.00 m The length of the foundation slab = 7.00 m All listed here Area of footing slab = 11.00 m2 Distance of C.G. of the loads from the smaller column = 3.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction The floor is rubbed with oxalic acid, for making its surface Uniform Glossy Durable Free from voids Uniform Glossy Durable Free from voids ANSWER DOWNLOAD EXAMIANS APP
Building Construction The function of cleats in a roof truss is All of these To support the common rafter To prevent the purlins from tilting To support purlins All of these To support the common rafter To prevent the purlins from tilting To support purlins ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS