Power Systems Two generating stations delivering a powers of P1 = 150 MW, P2 =100 MW and the B coefficients are B11 = 0.005, B22 = 0.002, B12=B21= -0.001. Find the transmission line losses? 85.5 105.2 95.5 102.5 85.5 105.2 95.5 102.5 ANSWER DOWNLOAD EXAMIANS APP
Power Systems A fault occurring at the terminals of an unloaded synchronous generator operating at its rated voltage has resulted in the following values of currents and voltages. IR0 = j 2.37 pu IR1 = -j 3.05 pu IR2 = j 0.68 pu VR0 = VR1 = VR2 = 0.237 pu. Which of the following faults has occurred? LLG LL LG LLL LLG LL LG LLL ANSWER DOWNLOAD EXAMIANS APP
Power Systems Steady state stability of a power system is improved by using double circuit line instead of single circuit line single pole switching decreasing generator inertia All of these using double circuit line instead of single circuit line single pole switching decreasing generator inertia All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems A transmission line has self and mutual impedances of 0.8 pu and 0.2 pu. Find the positive, negative and zero sequence impedances respectively? 0.6, 0.6 and 1.2 pu 0.8, 0.6 and 1.2 pu 0.8, 0.8 and 1.2 pu 0.6, 0.8 and 1.2 pu 0.6, 0.6 and 1.2 pu 0.8, 0.6 and 1.2 pu 0.8, 0.8 and 1.2 pu 0.6, 0.8 and 1.2 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems Where is the draft tube of a hydroelectric plant that is an airtight pipe located In between the runner exhaust and the tail race. Near the surge tank. In between the penstock and runner. At the beginning of the penstock. In between the runner exhaust and the tail race. Near the surge tank. In between the penstock and runner. At the beginning of the penstock. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS