Hydraulics and Fluid Mechanics in ME To avoid an interruption in the flow of a syphon, an air vessel is provided at the inlet ay nay point between inlet and outlet at the outlet at the summit at the inlet ay nay point between inlet and outlet at the outlet at the summit ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME The discharge through a wholly drowned orifice is given by (where H1 = Height of water (on the upstream side) above the top of the orifice, H2 = Height of water (on the downstream side) above the bottom of the orifice, and H = Difference between two water levels on either side of the orifice) Q = Cd × bH2 × √(2gh) Q = Cd × b (H2 - H1) × √(2gh) Q = Cd × bH × √(2gh) Q = Cd × bH₁ × √(2gh) Q = Cd × bH2 × √(2gh) Q = Cd × b (H2 - H1) × √(2gh) Q = Cd × bH × √(2gh) Q = Cd × bH₁ × √(2gh) ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Which of the following turbine is preferred for 0 to 25 m head of water? Kaplan turbine Francis turbine Pelton wheel None of these Kaplan turbine Francis turbine Pelton wheel None of these ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME If the dynamic viscosity of a fluid is 0.5 poise and specific gravity is 0.5, then the kinematic viscosity of that fluid in stokes is 0.25 None of these 1 0.5 0.25 None of these 1 0.5 ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Bulk modulus of a fluid is the ratio of Increase in volume to the viscosity of fluid Increase in pressure to the volumetric strain Critical velocity to the viscosity of fluid Shear stress to shear strain Increase in volume to the viscosity of fluid Increase in pressure to the volumetric strain Critical velocity to the viscosity of fluid Shear stress to shear strain ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME When the velocity distribution is uniform over the cross-section, the correction factor for momentum is 1 2 43924 1 2 43924 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS