Theory of Machine The secondary unbalanced force due to inertia of reciprocating parts in a reciprocating engine is given by (where m = Mass of reciprocating parts, ω = Angular speed of crank, r = Radius of crank, θ = Angle of inclination of crank with the line of stroke, and n = Ratio of the length of connecting rod to radius of crank) m.ω².r (sin 2θ/n) m.ω².r sinθ m.ω².r cosθ m.ω².r (cos 2θ/n) m.ω².r (sin 2θ/n) m.ω².r sinθ m.ω².r cosθ m.ω².r (cos 2θ/n) ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine Which of the below are inversions of slider crank mechanism?1. Oscillating cylinder engine mechanism2. Toggle mechanism3. Radial cylinder engine mechanism4. Quick return mechanism 1, 2 and 4 1, 2 and 3 2, 3 and 4 1, 3 and 4 1, 2 and 4 1, 2 and 3 2, 3 and 4 1, 3 and 4 ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The velocity of sliding of meshing gear teeth is(Where ω₁ and ω₂ are angular velocities of meshing gears and ‘y’ is distance between point of contact and the pitch point) (ω₁ + ω₂) y (ω₁/ω₂) y (ω₁ × ω₂) y (ω₁ + ω₂)/y (ω₁ + ω₂) y (ω₁/ω₂) y (ω₁ × ω₂) y (ω₁ + ω₂)/y ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine A shaft has an attached disc at the centre of its length. The disc has its centre of gravity located at a distance of 2 mm from the axis of the shaft. When the shaft is allowed to vibrate in its natural bow-shaped mode, it has a frequency of vibration of 10 rad/s. When the shaft is rotated at 300 r.p.m., it will whirl with a radius of 2.50 mm 3.0 mm 2 mm 2.22 mm 2.50 mm 3.0 mm 2 mm 2.22 mm ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine When the addenda on pinion and wheel is such that the path of approach and path of recess are half of their maximum possible values, then the length of the path of contact is given by (where r = Pitch circle radius of pinion, R = Pitch circle radius of wheel, and φ = Pressure angle) [(r² + R²) cosφ]/2 [(r² + R²) sinφ]/2 [(r + R) cosφ]/2 [(r + R) sinφ]/2 [(r² + R²) cosφ]/2 [(r² + R²) sinφ]/2 [(r + R) cosφ]/2 [(r + R) sinφ]/2 ANSWER DOWNLOAD EXAMIANS APP