Manufacturing And Production Technology The specific cutting energy used for establishing the machinability of the metal depends upon its Micro-structure All of these Work hardening characteristics Coefficient of friction Micro-structure All of these Work hardening characteristics Coefficient of friction ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The width of cutting edge of a parting off tool varies from 8 to 30 mm 5 to 20 mm 3 to 12 mm 15 to 40 mm 8 to 30 mm 5 to 20 mm 3 to 12 mm 15 to 40 mm ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A fixture is defined as a device which All of these Holds and locates a workpiece and guides and controls one or more cutting tools Holds and locates a workpiece during an inspection or for a manufacturing operation Is used to check the accuracy of workpiece All of these Holds and locates a workpiece and guides and controls one or more cutting tools Holds and locates a workpiece during an inspection or for a manufacturing operation Is used to check the accuracy of workpiece ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology As the cutting speed increases, the tool cutting forces Increases First increases and then decreases Decreases Remain constant Increases First increases and then decreases Decreases Remain constant ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A shaft has a dimension, φ9 +0.025⁺⁰∙⁰⁰⁹, the respective values of fundamental deviation and tolerance are −0.009, ± 0.008 −0.025, 0.016 −0.009, 0.016 −0.025, ±0.008 −0.009, ± 0.008 −0.025, 0.016 −0.009, 0.016 −0.025, ±0.008 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The lip angle is the angle Made by the face of the tool and the plane parallel to the base of the cutting tool None of the listed here Between the face of the tool and a line tangent to the machined surface at the cutting point Between the tool face and the ground end surface of flank Made by the face of the tool and the plane parallel to the base of the cutting tool None of the listed here Between the face of the tool and a line tangent to the machined surface at the cutting point Between the tool face and the ground end surface of flank ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS