Airport Engineering The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be 3130 m 2845 m 3030 m 2910 m 3130 m 2845 m 3030 m 2910 m ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is 75 knots 850 knots 675 knots 775 knots 75 knots 850 knots 675 knots 775 knots ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering For Class ‘A’ Air port the difference of reduced levels of higher and lower edges of the conical surface, is 100 m 50 m 75 m 25 m 100 m 50 m 75 m 25 m ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering For the taxiways, the following statement is true The maximum longitudinal grade is 3% The permissible transverse grade is 1.5% All listed here The permissible rate of change of grade is 1% The maximum longitudinal grade is 3% The permissible transverse grade is 1.5% All listed here The permissible rate of change of grade is 1% ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering To cope up high temperature of 196°C, the taxi ways and aprons are constructed with Plain concrete Rubberised tar concrete All listed here Asphaltic concrete Plain concrete Rubberised tar concrete All listed here Asphaltic concrete ANSWER DOWNLOAD EXAMIANS APP
Airport Engineering The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be 2.5 m 10.0 m 5.0 m 7.5 m 2.5 m 10.0 m 5.0 m 7.5 m ANSWER DOWNLOAD EXAMIANS APP