Power Systems The power output from an hydroelectric plants depend on type of dam, type of catchment area and discharge. discharge, system efficiency. type of turbine, type of dam and type of catchment area. type of dam, head, system efficiency. type of dam, type of catchment area and discharge. discharge, system efficiency. type of turbine, type of dam and type of catchment area. type of dam, head, system efficiency. ANSWER DOWNLOAD EXAMIANS APP
Power Systems In kaplan runner, the number of blades is generally of the order of 1 - 2. 12 - 16. 3 - 6. 16 - 24. 1 - 2. 12 - 16. 3 - 6. 16 - 24. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Installation of capacitors at suitable locations and of optimum size in a distribution system results in reduction of KVA rating of distribution transformers improved voltage regulation reduction in distribution power loss All of these reduction of KVA rating of distribution transformers improved voltage regulation reduction in distribution power loss All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following is/are the advantages of synchronous phase modifier over the shunt compensation? initial cost is low single unit can be used as both capacitance and inductor by adjusting the excitation both 1 and 2 smooth voltage regulation is possible by controlling excitation initial cost is low single unit can be used as both capacitance and inductor by adjusting the excitation both 1 and 2 smooth voltage regulation is possible by controlling excitation ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 250 MW and PG2 = 0 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 150 MW and PG2 = 100 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand? 5 cm 15 cm 1.5 cm 1 cm 5 cm 15 cm 1.5 cm 1 cm ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS