Power Systems If a fault occurs on any feeder, the fault current is equal to unsectional bus bar. much higher than with unsectional bus bar. none of these. much lower than with unsectional bus bar. equal to unsectional bus bar. much higher than with unsectional bus bar. none of these. much lower than with unsectional bus bar. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Maximum power capacity of a transmission line can be increased by increasing voltage level nether 1 nor 2 either 1 or 2 decreasing reactance value increasing voltage level nether 1 nor 2 either 1 or 2 decreasing reactance value ANSWER DOWNLOAD EXAMIANS APP
Power Systems A transmission line is compensated with shunt capacitance Csh. If the uncompensated transmission line surge impedance is Zs, then find the new surge impedance Zn after shunt compensation? All of these Zs*√(1 + Kcsh) √(1 + Kcsh)/Zs Zs/√(1 + Kcsh) All of these Zs*√(1 + Kcsh) √(1 + Kcsh)/Zs Zs/√(1 + Kcsh) ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following faults is/are treated as external faults? Failure of prime mover of the generator All of these Over voltage Failure of excitation Failure of prime mover of the generator All of these Over voltage Failure of excitation ANSWER DOWNLOAD EXAMIANS APP
Power Systems Surge impedance loading of a transmission line can be increased by both 1 and 3 addition of lumped capacitance in series increasing its voltage level addition of lumped inductance in parallel both 1 and 3 addition of lumped capacitance in series increasing its voltage level addition of lumped inductance in parallel ANSWER DOWNLOAD EXAMIANS APP
Power Systems The ABCD constants of a 3-phase transmission line are A = D = 0.8∠1°, B = 170∠85° Ω , C = 0.002∠90.4° ℧. The sending end voltage is 400 kV. The receiving end voltage under no load condition is 350 kV 500 kV 400 kV 600 kV 350 kV 500 kV 400 kV 600 kV ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS