Workshop Technology The operation of cutting a sheet of metal in a straight line along the length, is known as Forming Slitting Plunging Notching Forming Slitting Plunging Notching ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Sand wash is a casting defect which Results in a mismatching of the top and bottom parts of a casting Results in general enlargement of the casting Occurs near the ingates as rough lumps on the surface of a casting Occurs as sand patches on the upper surface of a casting Results in a mismatching of the top and bottom parts of a casting Results in general enlargement of the casting Occurs near the ingates as rough lumps on the surface of a casting Occurs as sand patches on the upper surface of a casting ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For gas welding, the pressure desired at the welding torch for oxygen is 70 to 280 kN/m² 7 to 103 kN/m² 280 to 560 kN/m² 560 to 840 kN/m² 70 to 280 kN/m² 7 to 103 kN/m² 280 to 560 kN/m² 560 to 840 kN/m² ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The shrinkage allowance for cast iron pattern is 20 mm/m 10 mm/m 26 mm/m 16 mm/m 20 mm/m 10 mm/m 26 mm/m 16 mm/m ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a gas welding of mild steel using an oxyacetylene flame, the total amount of acetylene consumed is 10 litres. The oxygen consumption from the cylinder is 5 litres 10 litres 20 litres 15 litres 5 litres 10 litres 20 litres 15 litres ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For cutting brass, the hacksaw blade should have ________ teeth per 25 mm. 14 24 40 32 14 24 40 32 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS