Manufacturing And Production Technology The lathe spindles at the nose end have Tapered threads Internal screw threads No threads External screw threads Tapered threads Internal screw threads No threads External screw threads ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In centerless grinders, the regulating wheel is inclined at 9° to 15° 0° to 8° 21° to 25° 16° to 20° 9° to 15° 0° to 8° 21° to 25° 16° to 20° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A ring gauge is used to measure Outside diameter but not roundness Both outside diameter and roundness Only external threads Roundness but not outside diameter Outside diameter but not roundness Both outside diameter and roundness Only external threads Roundness but not outside diameter ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 20.56 36.56 26.56 30.56 20.56 36.56 26.56 30.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Side rake angle of a single point cutting tool is the angle By which the face of the tool is inclined towards back Between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base By which the face of the tool is inclined sideways Between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool By which the face of the tool is inclined towards back Between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base By which the face of the tool is inclined sideways Between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology For softer materials, the point angle of the drill is kept Less than 118° Equal to 118° Any one of these More than 118° Less than 118° Equal to 118° Any one of these More than 118° ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS