Measurement and Instrumentation The function of shunt in an ammeter is to Increase the sensitivity of the ammeter None of the listed here By pass the current Increase the resistance of ammeter Increase the sensitivity of the ammeter None of the listed here By pass the current Increase the resistance of ammeter ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An electrodynamic meter can be used to measure DC current. AC volatge. both AC and DC voltage. DC voltage. DC current. AC volatge. both AC and DC voltage. DC voltage. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 10.6 V. 12.6 V. 15 V. 11.1 V. 10.6 V. 12.6 V. 15 V. 11.1 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The limiting errors of measurement of power consumed by and the current passing through a resistance are ±1.5% and ±1% respectively. What is the limiting error ( in %) of measurement of resistance ? ±3.5% ± 2.5% ± 1% ± 1.5% ±3.5% ± 2.5% ± 1% ± 1.5% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The pressure coil of a wattmeter should be connected on the supply side of the current coil when Supply voltage is low None of these Load impedance is high Load impedance is low Supply voltage is low None of these Load impedance is high Load impedance is low ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Moving iron instruments have _____ scale. Uniform None of the listed here Log Squared Uniform None of the listed here Log Squared ANSWER DOWNLOAD EXAMIANS APP