Machine Design The fatigue life of a part can be improved by Electroplating Coating Shot peening Polishing Electroplating Coating Shot peening Polishing ANSWER DOWNLOAD EXAMIANS APP
Machine Design The stress which vary from a minimum value to a maximum value of the same nature (i.e. tensile or compressive) is called Fluctuating stress Alternating stress Yield stress Repeated stress Fluctuating stress Alternating stress Yield stress Repeated stress ANSWER DOWNLOAD EXAMIANS APP
Machine Design The groove angle of the pulley for rope drive is usually 20° 35° 60° 45° 20° 35° 60° 45° ANSWER DOWNLOAD EXAMIANS APP
Machine Design According to Indian standards, the diameter of rivet hole is made larger than the basic size of rivet by 1 mm for rivet diameter from 27 mm to 36 mm 0.5 mm up to rivet diameter of 24 mm 2 mm for rivet diameter from 39 mm to 48 mm All of these 1 mm for rivet diameter from 27 mm to 36 mm 0.5 mm up to rivet diameter of 24 mm 2 mm for rivet diameter from 39 mm to 48 mm All of these ANSWER DOWNLOAD EXAMIANS APP
Machine Design The valve rod in a steam engine is connected to an eccentric rod by Bolted joint Universal coupling Knuckle joint Cotter joint Bolted joint Universal coupling Knuckle joint Cotter joint ANSWER DOWNLOAD EXAMIANS APP
Machine Design In replacing the V-belts, a complete set of new belts is used instead of replacing a single damaged belt because Belts are available in sets Only one belt cannot be fitted with other used belts The new belt will carry more than its share and result in short life New and old belts will cause vibrations Belts are available in sets Only one belt cannot be fitted with other used belts The new belt will carry more than its share and result in short life New and old belts will cause vibrations ANSWER DOWNLOAD EXAMIANS APP