Machine Design Eye bolts are used for Transmission of power Foundation purposes Absorbing shock and vibrations Lifting and transportation of machines and cubicles Transmission of power Foundation purposes Absorbing shock and vibrations Lifting and transportation of machines and cubicles ANSWER DOWNLOAD EXAMIANS APP
Machine Design The ratio of the ultimate stress to the design stress is known as Strain Factor of safety Elastic limit Bulk modulus Strain Factor of safety Elastic limit Bulk modulus ANSWER DOWNLOAD EXAMIANS APP
Machine Design For unequal width of butt straps, the thicknesses of butt straps are 0.625 t for both the straps on the inside and outside 0.75 t for wide strap on the inside and 0.625 t for narrow strap on the outside 0.75 t for both the straps on the inside and outside 0.75 t for narrow strap on the inside and 0.625 t for wide strap on the outside 0.625 t for both the straps on the inside and outside 0.75 t for wide strap on the inside and 0.625 t for narrow strap on the outside 0.75 t for both the straps on the inside and outside 0.75 t for narrow strap on the inside and 0.625 t for wide strap on the outside ANSWER DOWNLOAD EXAMIANS APP
Machine Design A compound cylinder with inner radius 50 mm and outer radius 70 mm is made by shrinking one cylinder on to the other cylinder, the junction radius is 60 mm and the junction pressure is 1.1 N/mm². The maximum hoop stress developed in the inner cylinder is 7.2 N/mm² compression 7.2 N/mm² tension 3.6 N/mm² compression 3.6 N/mm² tension 7.2 N/mm² compression 7.2 N/mm² tension 3.6 N/mm² compression 3.6 N/mm² tension ANSWER DOWNLOAD EXAMIANS APP
Machine Design The design of pin of a rocker arm of an I.C. engine is based on All of these Bearing failure Bending failure Shearing failure All of these Bearing failure Bending failure Shearing failure ANSWER DOWNLOAD EXAMIANS APP
Machine Design A bolt of M 24 × 2 means that The nominal diameter of bolt is 24 mm and pitch is 2 mm The effective diameter of bolt is 24 mm and there are 2 threads per cm The pitch of the thread is 24 mm and depth is 2 mm Cross-sectional area of the threads is 24 mm² The nominal diameter of bolt is 24 mm and pitch is 2 mm The effective diameter of bolt is 24 mm and there are 2 threads per cm The pitch of the thread is 24 mm and depth is 2 mm Cross-sectional area of the threads is 24 mm² ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS