Process Equipment and Plant Design At the following point for a given packing and set of fluids, the pressure drop per metre of packed height, with variation in fluid rates and operating pressure Increases Remains same May increase or decrease depending upon the solubility of the gas in the liquid Decreases Increases Remains same May increase or decrease depending upon the solubility of the gas in the liquid Decreases ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The thickness of heat transfer plates used in the plate type heat exchanger ranges from __________ mm, pressed in a single piece provided with grooves & corrugations. 0.3 to 0.8 1.25 to 3.125 3.5 to 7.0 44055 0.3 to 0.8 1.25 to 3.125 3.5 to 7.0 44055 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The type of stress developed in a metallic bar on subjecting it to a change in temperature without allowing it to be deformed is __________ stress. Compressive Tensile Shear Thermal Compressive Tensile Shear Thermal ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Normal screwed fittings are used for pipes upto a diameter of __________ inches. 3 1.5 5 7 3 1.5 5 7 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Reflux ratio variation in a distillation column is between Zero and one Zero and infinity None of these Minimum and infinity Zero and one Zero and infinity None of these Minimum and infinity ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS